Things to know before upgrading laptop hard drive

Upgrading Your Laptop Hard Disk- Things You Need to Know

Whether it’s your old desktop or featured laptop, upgrading to hard disk is a perfect option to extend your system life. Hard drives are classic bottlenecks, and they definitely slow down your computer if it simply becomes old. After prolonged usage of laptop in accessing, sharing and downloading since the years, they get weary and start to perform in a slothful manner. In this blog post, you can learn on how to upgrade laptop hard disk, preparation work and installation.

laptop harddisk upgrade

Why do you need to upgrade?

Well, the most obvious reason pertaining to hard drive upgrade is the old one is dying. That’s exactly the situation, where you find a host of errors that your system throwing up. Aside, the obvious replacing of the weary drive, there is a proficient way to upgrade to an SSD (Solid State Drive). A Solid State Drive gives you the fastest storage, currently available at indispensable price range. It’s now really an economical option to replace the budget drive that came in your laptop with a totally faster and exceptionally low cost SSD.

Going straight with the fact that solid state drives improve any computer experience, we can use them as a primary operating system disks across wide range of desktop machines. There are many advantages of installing SSD into your laptop; they remain silent, produce very little heat, shock resistant, and consume very little amount of power. Furthermore, it steadily reduces your system boot time and, in the process, give older laptops a much needed boosted speed.

After knowing about the SSD and the need to upgrade your system hard drive, now put the glance on bunch of small details, while you are upgrading to new hard drive.

Preparing to swap the drive

In case your hard disk drive is completely dead with no chance of data recovery, you can skip the entire section as the tips are for readers that have some data to recover or back up. All you need to do is to install the new one. While, the rest section in this blog, assumes either that your current drive is in fully operating or that it is experiencing errors but has not fully damaged.

Cloning: If your laptop is currently operating in better condition and still you would like to upgrade to a new SSD, then easiest way is to clone the existing hard disk to the new drive and then swap them out. In this process, take your brand new drive and tether it to your laptop with a specialized USB to SATA cable. After that, make a perfect 1:1 copy of the weary drive to the new hard drive.

Backing up: Backing up your original drive content is more important to avoid data loss consequences. In addition, this step is utmost crucial if the drive you’re replacing is incurring errors. You should capture a perfect copy of the data here in order to recover as much of it as possible before the drive dies.

Selecting the new drive

Once you have taken the back up and imaged your disk, then next step is selecting your drive. While the most significant consideration in drive selection is not the storage size but actually the physical size. In general, laptops use 2.5″ drives and not the larger than 3.5″ drives found in desktop machines. It is worth to consider that solid state drives come in 2.5” so when you want to use in the desktop, you should a bracket adapter to size them up. The other point of consideration is drive thickness. 2.5″ form factor drives are available in three thicknesses: 12.5mm, 9.5 mm, and 7 mm, in which 9.5 mm thickness is the most commonly used.

Installing the new hard drive

The major task in upgrading the new hardware is changing the physical drive. Power down your laptop, unplug it and remove the battery properly. Now, carefully loosen the screws and gently open the panel. Inside laptop, at the far lower right you can find the primary hard drive bay in which the dead hard drive resides. Herein, you can see the two memory DIMMs and mSATA slot. Below that, you can find Wi-Fi adapter, and above that section where the bare circuit board is exist, there is a secondary drive bay.

Loosen the mounting screws, remove the old drive and place the new one inside. You can take assistance from online remote PC support to better handle this task. To sum up all, these are the important process while upgrading to new hard drive. For more help, choose remote PC tech support service and fix your technical glitches.

Pin It on Pinterest